SLX24
That the same occasion, can be equipped with different Mitou!
BETA58 or SM58 or receive folder \ wearing
Around the world performing classical singer of choice.
Reasonable and effective allocation of frequency bands need powerful wireless devices can be achieved, the user can quickly install the equipment and comfortable to use. Durable Shure SLX ultra-high frequency wireless systems installed automatically with innovative features (such as search and automatic frequency transmitter set), an extremely excellent clarity and wireless excellent Shure microphone, can meet these needs.
Support the use of ultra-high 20 frequently compatible with the system, SLX can smooth access to the church, auditorium, conference rooms and mobile devices, and other occasions. Shure SLX wireless systems using patented technology to expand compressed audio information, you can have an extremely clear voice, wireless technology beyond traditional constraints.
Information:
SLX wireless system uses a patent has been extended audio compression technology reference, you can have an extremely clear voice, wireless technology beyond traditional constraints.
Automatic selection frequency
Automatic transmitter set up
In the 24 MHz bandwidth in the frequency of 960 optional
Detachable 1 / 4 wavelength antenna
Microprocessors - Diversity take control
RF LED display
5, the volume of
Multi-function, backlit LCD
Low-power indicator light
Frequency and power lock
Solid metal floor
Volume control equipment at the rear
1 / 2 rack design
A rack components
For the rack placed in a location other than the anti-skid devices shock absorber
XLR and 1 / 4 inches output
Normally under the conditions of the use of
300m (900 feet)
Note: radio frequency signal depends on the actual scope of the absorption, reflection and
Degree of interference
Audio frequency response (+ / - 2 dB)
Minimum: 45 Hz
The most: 15 kHz
(Microphone system as a whole depends on the frequency components.)
Total harmonic distortion (reference + / - 38 kHz deviation, 1 kHz tone)
Usually 0.5%
Dynamic Range
> 100 dB A weight
The use of temperature range
-18 Degrees Celsius (0 degrees Fahrenheit) to +50 degrees C (+122 degrees Fahrenheit)
Note: The battery of this temperature range may be limited
Polarity of the audio transmitter
Pressure on the microphone diaphragm (or plug in headphones WA302 End
The positive voltage) will pin 2 (relative
In the low-impedance output pins 3) and high-impedance 1 / 4 inches output End
Voltage is generated.
SLX1 pocket transmitter
Audio input level
The largest gain position for the microphone -10 dBV
0 dB gain position for the greatest +10 dBV
-10 DB gain position for the greatest +20 dBV
Gain adjustment range
30dB
Input impedance
1 M?
RF transmitter output
Up to 50 mW (depending on the country in which the system of relevant laws and regulations)
Size
108 mm (high) x 64 mm (W) x 19 mm (Shenzhen) (4.25 x 2.50 x 0.75 inches)
Weight
81 g (3 oz) (without batteries)
Enclosures
Molded ABS shell
Power requirements
2 "AA"-type alkaline batteries, or rechargeable batteries
Battery life
> 8 hours (alkaline batteries)
SLX2 handheld transmitter
Audio input level
-10 DB for the position of the largest +2 dBV
0 dB location for the largest -8 dBV
Gain adjustment range
10dB
RF transmitter output
Up to 50 mW (depending on the country in which the system of relevant laws and regulations)
Size (including SM58 microphone head)
254 mm x 51 mm (diameter) (10 x 2-inch)
Weight
290 g (10.2 ounces) (without batteries)
Enclosures
Die-PC / ABS handle and battery enclosures
Power requirements
2 "AA"-type alkaline batteries, or rechargeable batteries
Battery life
> 8 hours (alkaline batteries)
SLX4 receiver
Size
42 mm (high) x 197 mm (W) x 134 mm (Shenzhen) (1.65 x 7.76 x 5.28 inches)
Weight
816 g
Enclosures
Steel plating
Audio output level (see + / - 38 kHz deviation, 1 kHz tone)
XLR connectors (access «load): -13 dBV
1 / 4 inches joints (Access 3000 »load): -2 dBV
Output impedance
XLR connectors: 200 »
1 / 4 inches joints: 1 k?
XLR output
Impedance balance
Pin 1: Ground
Pin 2: (+)
Pin 3: (-)
Sensitivity
Usually in the 12 dB SINAD at -105 dBm
- Frequency inhibition
> Usually 70 dB
Power requirements
150 mA at 12 - 18 Vdc (external power supply)
|
|
|
|
|
